Shijiazhuang sunshine imp/exp trade co.,Ltd
CATEGORY
Galvanized IBR roofing nails with rubber washer for roof sheet
Galvanized IBR roofing nails with rubber washers offer a robust solution for securing roof sheets, providing both strength and a waterproof seal. The corrosion-resistant properties and secure fastening capabilities make the galvanized IBR roofing nails an excellent choice for long-lasting roof installations.
Category:
Products
NAIILS SERIES
Roofing Nail
Galvanized IBR roofing nails with rubber washer for roof sheet
Galvanized IBR roofing nails with rubber washer for roof sheet
Ibr roofing nails introduction
Galvanized IBR roofing nails with rubber washers are an essential component for securing roof sheets, offering durability, corrosion resistance, and a watertight seal. The rubber roof nails provide a dependable and efficient solution for various roofing applications, ensuring that your roof remains secure and protected from the elements.
| IBR roofing nails | SUNSHINE |
|---|---|
| Product name | IBR roofing nails/assembled roofing nails |
| Material | low carbon steel nail wire（Q195/Q235） |
| Diameter | 3.5mm-5.0mm |
| Shank | Spiral |
| Length | 75mm 90mm 100mm 120mm |
| Finish | EG |
| Packing | one set(100 roofing nails+100 washers)in poly-bag,10 poly-bags per carton |
 |
 |
Galvanized IBR roofing nails features
Corrosion Resistance: The galvanized coating protects the ibr roofing nails from rust and corrosion, making them ideal for outdoor use and extending the lifespan of the roofing.
Watertight Seal: The rubber washer compresses under the roofing nail head, creating a tight seal that prevents water leakage and protects the underlying structure from moisture damage.
Secure Fastening: The IBR roofing nails provide a strong and secure hold, ensuring that the roofing sheets remain firmly in place even under harsh weather conditions.
Easy Installation: The sharp point and flat head design make the ibr roofing nails easy to install, reducing labor time and effort.
How to nail IBR roofing sheet with IBR roofing nails?
Roof Preparation: Ensure the roof surface is clean, free of debris, and any necessary repairs are made to provide a solid base for the IBR sheets.
Install Roofing Felt: Place a protective layer of roofing felt between the roof structure and the IBR sheets to provide an additional barrier against moisture and prevent leaks.
Measure and Cut IBR Sheets: Measure the length and width of each roof section, mark the measurements on the IBR sheets, and cut them to the required size using a circular saw.
Install IBR Sheets: Start from the bottom edge of the roof and align the first sheet. Secure the sheet by drilling screws through the pre-drilled holes in the sheet and into the roof structure.
Secure with IBR Roofing Nails: Use IBR roofing nails to fasten the flashing and ridge capping to the roof structure. Place the ibr roofing nails just below the adhesive strip on the shingle to ensure they are not exposed to the elements, which can cause rust and deterioration over time.
Ridge Capping Installation: Install ridge capping at the highest point of the roof to provide a watertight seal and improve aesthetics. Cut the ridge caps to the required length and secure them with IBR roofing nails.
IBR roofing nails sizes
| Umbrella nails Specification | Specification Length(mm) | Rod Diameter(mm) | Head Diameter(mm) |
| BWG8*2" | 50.8 | 4.19 | 20 |
| BWG8*2.5" | 63.5 | 4.19 | 20 |
| BWG9*1.5" | 38 | 3.73 | 20 |
| BWG9*2.5" | 63.5 | 3.73 | 20 |
| BWG9*3" | 76.2 | 3.73 | 20 |
| BWG10*1.75" | 44.5 | 3.37 | 20 |
| BWG10*2" | 50.8 | 3.37 | 20 |
| BWG10*2.5" | 63.5 | 3.37 | 20 |
| BWG11*1.5" | 38 | 3.02 | 18 |
| BWG11*1.75" | 44.5 3 | 0.02 | 18 |
| BWG11*2" | 50.8 | 3.02 | 18 |
| BWG11*2.5" | 63.5 | 3.02 | 18 |
| BWG12*1.5" | 38 | 2.74 | 18 |
| BWG12*1.75" | 44.5 | 2.74 | 18 |
| BWG13*1.5" | 38 | 2.38 | 15 |
| BWG13*2" | 50.8 | 2.38 | 15 |
| BWG14*1.75" | 40 | 2.1 | 14 |
Packing:
one set(100 roofing nails+100 washers)in poly-bag.
1, 10 bags per carton, 100 pcs per bag;
2, 1000 kg minimum order;
3, packaging can be customized.
PREV
China supply #45 steel nails with bamboo shank
PRODUCT MESSAGE
CONTACT US
You can email us
24-Hour Consultation Hotline
Mobile/Wechat/WhatsApp: 0086-13111516795
Tel: 0086-31185271560
Head office Address
UNIT A RM2521,Wanhao Building NO.176 ZhongHua south street,Shijiazhuang city, Hebei China
Please tell us what you need
Our engineers will contact you within 12 hours and provide free proposal and quotation.
Copyright © 2022 shijiazhuang sunshine imp&exp trade co.,Ltd | License
